ChristmasInKaralee
Senior elf
Just want members thoughts on the following pole.
I was thinking of Galvanised Steel pole for my future Megatree.
Inground Galvanised Pipe:
1m long - Outer Diameter of 60.3mm and Inner Diameter of 51.3mm so a wall thickness of 4.5mm
with a few bags of concrete holding it in.
Aboveground Galvanised pipe:
6.5m (with 1m of it slotted inside the Inground pipe) - Outer Diameter of 48.3mm and Inner Diameter of 41.9mm so a wall thickness of 3.2mm
Is this an over kill or not strong enough? Would I need guide wires.
cheers in advance.
I was thinking of Galvanised Steel pole for my future Megatree.
Inground Galvanised Pipe:
1m long - Outer Diameter of 60.3mm and Inner Diameter of 51.3mm so a wall thickness of 4.5mm
with a few bags of concrete holding it in.
Aboveground Galvanised pipe:
6.5m (with 1m of it slotted inside the Inground pipe) - Outer Diameter of 48.3mm and Inner Diameter of 41.9mm so a wall thickness of 3.2mm
Is this an over kill or not strong enough? Would I need guide wires.
cheers in advance.