rustybiker69
New elf
- Joined
- May 9, 2020
- Messages
- 31
I have a strange problem. When I started the show a week ago all working well, then just the other day the LED p10 Panel wasn't displaying. I am Running Rpi with FPP controlling a F16V3 for Pixels and the Beaglebone for the Panel.
Yesterday, I updated the BBB to 4.5 so is now the same version as the Rpi. Worked while testing, but as soon as my show started it wasn't working. After several restarts, re-plugging cat 5 it started to work again and worked fine for the last hour of my show.
Then tonight the same problem has happened. I have checked ethernet cables ( lights on the BB are flashing) and the rest of the show is working fine.
I noticed on the status page of the Rpi I have the message - " Cannot Ping e1.31 Channel Data target 192.168.1.102" which is the ip address for the BBB
I thought it may be the network switch, but the F16 is running through the same switch and this is working fine. I tried a different port on the switch and also tried a different cable still no joy Any ideas?
Yesterday, I updated the BBB to 4.5 so is now the same version as the Rpi. Worked while testing, but as soon as my show started it wasn't working. After several restarts, re-plugging cat 5 it started to work again and worked fine for the last hour of my show.
Then tonight the same problem has happened. I have checked ethernet cables ( lights on the BB are flashing) and the rest of the show is working fine.
I noticed on the status page of the Rpi I have the message - " Cannot Ping e1.31 Channel Data target 192.168.1.102" which is the ip address for the BBB
I thought it may be the network switch, but the F16 is running through the same switch and this is working fine. I tried a different port on the switch and also tried a different cable still no joy Any ideas?